Open Source USB AVR Programmer for Students and Hobbyists

If you cannot afford to buy a USB programmer for AVR, don’t worry, you can make one by yourself. This programmer uses a Atmega8 microcontroller with a few external passive components. The good thing is you don’t need any USB controller because it is implemented in the firmware inside Atmega8. Yes, you are right, you need an AVR programmer once to load the firmware inside Atmega8. You figure out how you gonna manage that.

This programmer has been tested under Windows, Mac OS X, and Linux and worked well. It can program a chip at speed up to 5Kbytes/sec. The firmware for Atmega8 and necessary drivers for host computer are available for free.


Read

Related Posts

3 comments

  • I have build it and working great…
    The design is in Proteous 8.1.

  • any full details .. the code and eagle design
    seems to be good .. wish to implement it 🙂

  • hai;
    i like this project ……also i need a details of the project……………………
    even though i’m excited with this web site…
    bye…

Leave a Reply

Your email address will not be published. Required fields are marked *