{"id":12923,"date":"2017-01-05T15:50:46","date_gmt":"2017-01-05T20:50:46","guid":{"rendered":"http:\/\/embedded-lab.com\/blog\/?p=12923"},"modified":"2017-01-06T09:17:04","modified_gmt":"2017-01-06T14:17:04","slug":"send-email-text-messages-using-esp8266","status":"publish","type":"post","link":"https:\/\/embedded-lab.com\/blog\/send-email-text-messages-using-esp8266\/","title":{"rendered":"How to send email and text messages using ESP8266"},"content":{"rendered":"

Earlier we looked at a method of programming ESP8266 to\u00a0send sensor data directly to Google Sheets<\/strong><\/a> without using any third party modules. Now, we will expand that a little bit and learn to send an email as well as a text message (SMS) using ESP8266. In this demo, we will configure our ESP8266 to send an email and a text message when the\u00a0value of a variable (which could be a sensor output, or any other physical quantity) goes beyond a threshold limit.<\/p>\n

This is not entirely a new topic as there are similar tutorials available online\u00a0to show how to do this. This article particularly\u00a0focusses on just using the ESP8266 and Google environment to send email or a text message.<\/p>\n

\"Send<\/a>

Send Text and Email from NodeMCU<\/p><\/div>\n

<\/p>\n

Hardware requirement:<\/h5>\n

To understand the concept, all we need is an ESP8266 module and a power supply for\u00a0it, usually\u00a0a USB cable. I am using a NodeMCU board for convenience. We do not need any sensors or other things. For illustration of the method, we will just generate a random number between certain intervals, and if the number\u00a0goes beyond what we have set for threshold limit, we would like to receive an email and\/or a text message.<\/p>\n

Prepare a Google Sheets:<\/h5>\n

Just like in pushing data to ESP8266 to Google Sheets<\/a>, we will create a new Google Sheet in a Google Drive. So, let\u2019s do the following:
\n1) Open up your Google Drive in a web browser and create a Google Sheets. You can call this file whatever you like. I called it \u2018SendEmailAndText_ESP8266\u2019.
\n2) From the Google Sheets that you just created, go to Tools > Script editor…<\/strong><\/p>\n

\"GAS<\/a>

GAS > Tools > Script Editor<\/p><\/div>\n

3) Give a name to the Script editor main file in the toolbar (whatever you like).
\n4) Paste the following code to the Code.gs file (assuming you haven\u2019t change the default file name). Again, this filename doesn\u2019t matter either.<\/p>\n

Google Scripts Code:<\/h5>\n\n
\/\/ Created by: Akshaya Niraula<\/span>\n\/\/ Date: 2016 December 15th.<\/span>\n \n\/\/ Steps are valid as of 2016 December 15th.<\/span>\n\/\/ 0) From Google spreadsheet, Tools &gt; Script Editor...<\/span>\n\/\/ 1) Write your code<\/span>\n\/\/ 2) Save and give a meaningful name<\/span>\n\/\/ 3) Run and make sure "doGet" is selected<\/span>\n\/\/    You can set a method from Run menu<\/span>\n\/\/ 4) When you run for the first time, it will ask <\/span>\n\/\/    for the permission. You must allow it.<\/span>\n\/\/    Make sure everything is working as it should.<\/span>\n\/\/ 5) From Publish menu &gt; Deploy as Web App...<\/span>\n\/\/    Select a new version every time it's published<\/span>\n\/\/    Type comments next to the version<\/span>\n\/\/    Execute as: "Me (your email address)"<\/span>\n\/\/    MUST: Select "Anyone, even anonymous" on "Who has access to this script"<\/span>\n\/\/    For the first time it will give you some prompt, accept it.<\/span>\n\/\/    You will need the given information (url) later. This doesn't change, ever!<\/span>\n \n \nvar<\/span> number =<\/span> "8001239999"<\/span>;<\/span> \/\/ your phone number <\/span>\nvar<\/span> domain =<\/span> "tmomail.net"<\/span>;<\/span> \/\/ You may find your domain for you carrier at: http:\/\/www.emailtextmessages.com\/<\/span>\nvar<\/span> toEmail =<\/span> "YourOrFriendsEmail@gmail.com"<\/span>;<\/span>\n \nfunction<\/span> doGet(<\/span>e)<\/span>{<\/span>\n  Logger.log<\/span>(<\/span>"--- doGet ---"<\/span>)<\/span>;<\/span>\n \n  \/\/ for debugging<\/span>\n  if<\/span> (<\/span>e ==<\/span> null<\/span>)<\/span>{<\/span>e=<\/span>{<\/span>}<\/span>;<\/span> e.parameters<\/span> =<\/span> {<\/span>value:<\/span>"-1"<\/span>}<\/span>;<\/span>}<\/span>\n \n  try<\/span>{<\/span>\n    \/\/ get the values from parameters to local var<\/span>\n    var<\/span> value =<\/span> e.parameters<\/span>.value<\/span>;<\/span>\n    var<\/span> phoneEmail =<\/span> number +<\/span> "@"<\/span> +<\/span> domain;<\/span>\n \n    \/\/ Send Text Message (SMS)<\/span>\n    send_Email(<\/span>phoneEmail,<\/span> "NodeMCU here, your sensor went beyond your threshold. Sensor reported: "<\/span> +<\/span> value +<\/span> " on:"<\/span> +<\/span> new<\/span> Date<\/span>(<\/span>)<\/span>)<\/span>;<\/span> \n \n    \/\/ Send Email<\/span>\n    var<\/span> message =<\/span> "<b>Dear User,<\/b>\n \nYour equipment has reached it's threshold value. It just reported a value of "<\/span> +<\/span> value +<\/span> ". Please take a necessary action.\n"<\/span>;<\/span>\n    message +=<\/span> "As a valued customer, we have sent you a text message also. \n \n"<\/span>;<\/span>\n    message +=<\/span> "To learn more about this email, please click on the link below: \n"<\/span>;<\/span>\n    message +=<\/span> "<a href="<\/span>http:<\/span>\/\/www.embedded-lab.com\/" target="new">www.Embedded-Lab.com<\/a><\/span>\n \n \n";\n    message += "<\/span>Sincerely,<\/span>\n<<\/span>b><\/span>NodeMCU ESP8266<\/<\/span>b><\/span>";\n \n    send_Email(toEmail, message)\n \n    return ContentService.createTextOutput("<\/span>Things went successfully.");\n  }  \n   catch(error) {\n    Logger.log(JSON.stringify(error));\n    return ContentService.createTextOutput("<\/span>oops...." + error.message \n                                            + "<\/span>\\n" + new Date() \n                                            + "<\/span>\\nnumber:<\/span> " + number +\n                                            + "<\/span>\\ndomain:<\/span> " + domain);\n  }\n \n}\n \nfunction send_Email(address, message){\n \n  MailApp.sendEmail({\n          "<\/span>to": address,\n     "<\/span>subject": "<\/span>Threshold reached -<\/span> ESP8266",\n    "<\/span>htmlBody": message      \n   });\n \n  Logger.log("<\/span>send_textMessage:<\/span> " + "<\/span>Email sent to:<\/span> " + address);\n}<\/span><\/pre><\/td><\/tr><\/table><\/div>\n\n
Download Google App Script Code<\/a><\/h5>\n
Test the progress:<\/h5>\n
As shown in the image below, select doGet and click on bug icon to debug your code. If you followed the steps properly, you should have received a text message and an email from you gmail account.<\/p>\n
Please note<\/strong> Google will need your permissions to send email on your behalf so when Google asks for the permission, you must provide it.<\/p>\n
\"GAS<\/a>
GAS > Debug > DoGet<\/p><\/div>\n
If you didn\u2019t receive a text message and\/or an email, please double check your steps. If you did receive then let\u2019s publish our work so that we can get a URL which we can use in NodeMCU. To publish, click on Publish > Deploy as web app\u2026<\/strong><\/p>\n
\"GAS<\/a>
GAS > Publish menu<\/p><\/div>\n
Above action will show the following window. Make sure to select all the three steps as shown in the image below.<\/p>\n
\"GAS<\/a>
GAS > Deploy as Web App<\/p><\/div>\n
When you click on Update<\/strong> or Publish<\/strong>, you will see a box as shown below. From this box, copy the given address. I usually save this address back into Google Script for future use. We will need this address in NodeMCU\/ESP8266 code.<\/p>\n
Note<\/span>: we will call the text between \/s\/ and \/exec as GScriptID<\/strong>. This information is required in NodeMCU code.<\/p>\n
\"GAS<\/a>
GAS > Deploy as web app > Result<\/p><\/div>\n
Grab the URL from above box and append the \u201c?value=-1\u201d to it, it will look something like this:
\nhttps:\/\/script.google.com\/macros\/s\/—YourGScriptIDGoesHere—\/exec?value=-1. Now paste this URL to your browser’s address and press enter. In a few seconds you should receive an email and a text message.<\/p>\n
NodeMCU \/ ESP8266 Code:<\/h5>\n
Please make sure to grab the library file that helps us redirect to the URL that we need. This process has been explained in How To Post Data To Google Sheets Using Esp8266<\/a>.<\/p>\n
\/\/ BY: Akshaya Niraula<\/span> 
\n\/\/ ON: Jan 4, 2017<\/span> 
\n\/\/ AT: <\/span>http:\/\/www.embedded-lab.com\/<\/span><\/u><\/span> <\/p>\n
#include<\/span> <<\/span>ESP8266WiFi<\/span>.<\/span>h<\/span>><\/span> 
\n#include<\/span> “HTTPSRedirect.h”<\/span> <\/p>\n
const<\/span> char<\/span>*<\/span> ssid<\/span> =<\/span> “–Your SSID–“<\/span>;<\/span> 
\nconst<\/span> char<\/span>*<\/span> password<\/span> =<\/span> “–Your Password–“<\/span>;<\/span> <\/p>\n
\/\/ The ID below comes from URL <\/span> 
\n\/\/ after publishing Google Script as Web App.<\/span> 
\nconst<\/span> char<\/span> *<\/span>GScriptId<\/span> =<\/span> “–Your GScriptId–“<\/span>;<\/span> <\/p>\n
\nconst<\/span> char<\/span>*<\/span> host<\/span> =<\/span> “script.google.com”<\/span>;<\/span> 
\nconst<\/span> char<\/span>*<\/span> googleRedirHost<\/span> =<\/span> “script.googleusercontent.com”<\/span>;<\/span> <\/p>\n
const<\/span> int<\/span> httpsPort<\/span> =<\/span>     443<\/span>;<\/span> 
\nHTTPSRedirect<\/span> client<\/span>(<\/span>httpsPort<\/span>)<\/span>;<\/span> <\/p>\n
\/\/ Prepare the url (without the varying data)<\/span> 
\nString<\/span> url<\/span> =<\/span> String<\/span>(<\/span>“\/macros\/s\/”<\/span>)<\/span> +<\/span> GScriptId<\/span> +<\/span> “\/exec?”<\/span>;<\/span> <\/p>\n
const<\/span> char<\/span>*<\/span> fingerprint<\/span> =<\/span> “F0 5C 74 77 3F 6B 25 D7 3B 66 4D 43 2F 7E BC 5B E9 28 86 AD”<\/span>;<\/span> <\/p>\n
void<\/span> setup<\/span>(<\/span>)<\/span> {<\/span> 
\n     Serial<\/span><\/b>.<\/span>begin<\/span>(<\/span>115200<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Connecting to wifi: “<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>ssid<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>flush<\/span>(<\/span>)<\/span>;<\/span> <\/p>\n
     WiFi<\/span><\/b>.<\/span>begin<\/span>(<\/span>ssid<\/span>,<\/span> password<\/span>)<\/span>;<\/span> 
\n     while<\/span> (<\/span>WiFi<\/span><\/b>.<\/span>status<\/span>(<\/span>)<\/span> !=<\/span> WL_CONNECTED<\/span>)<\/span> {<\/span> 
\n             delay<\/span>(<\/span>500<\/span>)<\/span>;<\/span> 
\n             Serial<\/span><\/b>.<\/span>print<\/span>(<\/span>“.”<\/span>)<\/span>;<\/span> 
\n     }<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>” IP address: “<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>WiFi<\/span><\/b>.<\/span>localIP<\/span>(<\/span>)<\/span>)<\/span>;<\/span> <\/p>\n
      
\n     Serial<\/span><\/b>.<\/span>print<\/span>(<\/span>String<\/span>(<\/span>“Connecting to “<\/span>)<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>host<\/span>)<\/span>;<\/span> <\/p>\n
     bool<\/span> flag<\/span> =<\/span> false<\/span>;<\/span> 
\n     for<\/span> (<\/span>int<\/span> i<\/span>=<\/span>0<\/span>;<\/span> i<\/span><<\/span>5<\/span>;<\/span> i<\/span>++<\/span>)<\/span>{<\/span> 
\n             int<\/span> retval<\/span> =<\/span> client<\/span>.<\/span>connect<\/span>(<\/span>host<\/span>,<\/span> httpsPort<\/span>)<\/span>;<\/span> 
\n             if<\/span> (<\/span>retval<\/span> ==<\/span> 1<\/span>)<\/span> {<\/span> 
\n                         flag<\/span> =<\/span> true<\/span>;<\/span> 
\n                         break<\/span>;<\/span> 
\n             }<\/span> 
\n             else<\/span> 
\n                     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Connection failed. Retrying…”<\/span>)<\/span>;<\/span> 
\n     }<\/span> <\/p>\n
     \/\/ Connection Status, 1 = Connected, 0 is not.<\/span> 
\n     Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Connection Status: “<\/span> +<\/span> String<\/span>(<\/span>client<\/span>.<\/span>connected<\/span>(<\/span>)<\/span>)<\/span>)<\/span>;<\/span> 
\n     Serial<\/span><\/b>.<\/span>flush<\/span>(<\/span>)<\/span>;<\/span> 
\n      
\n     if<\/span> (<\/span>!<\/span>flag<\/span>)<\/span>{<\/span> 
\n             Serial<\/span><\/b>.<\/span>print<\/span>(<\/span>“Could not connect to server: “<\/span>)<\/span>;<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>host<\/span>)<\/span>;<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Exiting…”<\/span>)<\/span>;<\/span> 
\n             Serial<\/span><\/b>.<\/span>flush<\/span>(<\/span>)<\/span>;<\/span> 
\n             return<\/span>;<\/span> 
\n     }<\/span> <\/p>\n
     \/\/ Data will still be pushed even certification don’t match.<\/span> 
\n     if<\/span> (<\/span>client<\/span>.<\/span>verify<\/span>(<\/span>fingerprint<\/span>,<\/span> host<\/span>)<\/span>)<\/span> {<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Certificate match.”<\/span>)<\/span>;<\/span> 
\n     }<\/span> else<\/span> {<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Certificate mis-match”<\/span>)<\/span>;<\/span> 
\n     }<\/span> 
\n}<\/span> <\/p>\n
\/\/ This is the main method where data gets pushed to the Google sheet<\/span> 
\nvoid<\/span> sendValueToGoogle<\/span>(<\/span>String<\/span> value<\/span>)<\/span>{<\/span> 
\n     if<\/span> (<\/span>!<\/span>client<\/span>.<\/span>connected<\/span>(<\/span>)<\/span>)<\/span>{<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Connecting to client again…”<\/span>)<\/span>;<\/span>  
\n             client<\/span>.<\/span>connect<\/span>(<\/span>host<\/span>,<\/span> httpsPort<\/span>)<\/span>;<\/span> 
\n     }<\/span> 
\n     String<\/span> urlFinal<\/span> =<\/span> url<\/span> +<\/span> “value=”<\/span> +<\/span> value<\/span>;<\/span> 
\n     client<\/span>.<\/span>printRedir<\/span>(<\/span>urlFinal<\/span>,<\/span> host<\/span>,<\/span> googleRedirHost<\/span>)<\/span>;<\/span> 
\n}<\/span> <\/p>\n
\/\/ Continue pushing data at a given interval<\/span> 
\nvoid<\/span> loop<\/span>(<\/span>)<\/span> {<\/span> <\/p>\n
     \/\/ Here you will have your main code<\/span> 
\n     \/\/ To demonstrate the concept we are generating a random number<\/span> 
\n     long<\/span> randomValue<\/span> =<\/span> random<\/span>(<\/span>10<\/span>,<\/span> 20<\/span>)<\/span>;<\/span> <\/p>\n
     \/\/ Our lower threshold is 12 and upper threshold is 18<\/span> 
\n     \/\/ when given vlaue goes below lower or above upper the threshold<\/span> 
\n     \/\/ we would like to send information to GAS for email and text message<\/span> 
\n     if<\/span> (<\/span>randomValue<\/span> <<\/span> 12<\/span> ||<\/span> randomValue<\/span> ><\/span> 18<\/span>)<\/span> {<\/span> 
\n             Serial<\/span><\/b>.<\/span>println<\/span>(<\/span>“Random value outside the threshold: “<\/span> +<\/span> String<\/span>(<\/span>randomValue<\/span>)<\/span>)<\/span>;<\/span> 
\n             sendValueToGoogle<\/span>(<\/span>String<\/span>(<\/span>randomValue<\/span>)<\/span>)<\/span>;<\/span>  
\n     }<\/span> 
\n          
\n     delay<\/span> (<\/span>10000<\/span>)<\/span>;<\/span> \/\/ wait 10 sec<\/span> 
\n}<\/span> <\/p>\n
Download Arduino .ino code file<\/a><\/h5>\n","protected":false},"excerpt":{"rendered":"
Earlier we looked at a method of programming ESP8266 to\u00a0send sensor data directly to Google Sheets without using any third party modules. Now, we will expand that a little bit and learn to send an email as well as a text message (SMS) using ESP8266. In this demo, we will configure our ESP8266 to send an email and a text message when the\u00a0value of a variable (which could be a sensor output, or any other physical quantity) goes beyond a threshold limit. This is not entirely a new topic as there are similar tutorials available online\u00a0to show how to do<\/p>\n","protected":false},"author":4,"featured_media":12925,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1044,1464,1466],"tags":[1600,1598,1599],"class_list":["post-12923","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-esp8266","category-featured","category-tutorials","tag-esp8266-email","tag-esp8266-sms","tag-nodemcu-google"],"_links":{"self":[{"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/posts\/12923","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/comments?post=12923"}],"version-history":[{"count":11,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/posts\/12923\/revisions"}],"predecessor-version":[{"id":12944,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/posts\/12923\/revisions\/12944"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/media\/12925"}],"wp:attachment":[{"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/media?parent=12923"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/categories?post=12923"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/embedded-lab.com\/blog\/wp-json\/wp\/v2\/tags?post=12923"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}