Category Archives: Embedded Lab Projects


chipKIT Project 4: Digital light meter

Posted on by 3 comments

A light meter is used to measure the intensity of illumination in a given area. It is widely used in schools, warehouses, factories, hospitals, office buildings, museums, art-galleries, parking garages, stadiums, and many more, to measure and maintain proper lighting levels. The intensity of illumination is usually expressed in Lux or foot-candles. As the 4th project in our chipKIT tutorial series, today we are going to build a digital light meter using the chipKIT Uno32 board and the BH1750 digital light sensor. This project uses Digilent’s chipKIT Basic I/O shield for displaying the measured light intensity in Lux, foot-candles, and Watts/m^2 units.

Read more

Step-by-step guide for making a very simple temperature and humidity meter with 7-segment LED displays

Posted on by 5 comments

In this blog post, I am providing you step by step instructions to build a very simple temperature and relative humidity meter for indoor use. All you need to build this project are an Arduino Uno or compatible board, a DHT11 sensor, and a MAX7219 based 8-digit serial 7-segment LED display. The temperature is displayed in degree Celsius and relative humidity in percentage.

Read more

Making a mini LED Christmas tree

Posted on by 6 comments

My two and a half year old son loves toys with flashing lights. For this Christmas I thought of making a mini LED Christmas tree for him. This project uses 22 multi-color LEDs which are driven by a PIC12F683 microcontroller using the Charlieplexing technique. The details of the build procedure is described in the following sections.

Read more

Internet Logging Pill Dispenser using Propeller microcontroller

Posted on by 2 comments

Forgetting to take a medication is a common problem in older people. This instructable describes how to make a pill reminder, dispenser, and logger to ensure that your dear ones are taking their medications on time. It uses a Parallax Propeller micro-controller at its heart and keep track of when a patient should take their medications. It displays a count down timer one hour before dosage time and then when the time arrives, it generates audible messages, LED 7 Segment messages and lights an LED under the correct compartment to be opened. When the patient opens a compartment, a sensor

Read more

High-voltage seven segment LED display driver with SPI interface

Posted on by 44 comments

Seven segment LED displays are known to be resource and power hungry. But because they are visually so charming and readable from a far viewing distance and at a much wider viewing angle as compared to any other electronic displays, they are still hugely popular. The required number of I/O pins to drive the LED segments can be reduced significantly by using an additional dedicated hardware. For example, the MAXIM’s MAX7219 device allows you to interface 8 pieces of seven segment LED modules using only 3 I/O pins of Arduino or any other microcontroller. You can find details on the

Read more
« Older Entries Recent Entries »