New power supply boards added to our Tindie store
|
|
We have added two new regulated power supply boards and one general purpose double-sided prototyping circuit board (7cm X 9cm) to our Tindie store today. Both the power supply boards provide constant 3.3V and 5.0V power supply derived from an unregulated DC input ranging from 6.5-12V. One is designed to serve power supply for a breadboard circuit whereas the other one can be enclosed within the project box along with the project circuit board. The boards are designed for low power applications (600 mA).
The breadboard version can be powered either from a DC wall wart or 9V battery (connector clip is provided).
Breadboard version
9V battery clip is included
The second power supply board has pretty much the same specification except the size is made a bit smaller so that it occupies very little space inside a project box. A 9V battery clip is also included with this product. Two through-hole pads (SW1) are available onboard to connect an external ON/OFF switch if required.
Dual power supply board to power your electronics projects
Powering from a 9V battery
Finally, the prototyping board is a high-quality double sided universal board with standard 0.1″ spacing through holes. It has total 26 x 31 holes, and 24 x 2 pads on two edges on both sides.
Double-sided universal prototyping circuit board
Buy dual-power supply board (breadboard version, $8.99)
Buy dual-power supply board (non-breadboard version, $7.99)
Buy double-sided prototyping board ($3.99)
|
|