VIA technologies introduces the $49 Android PC system

Posted on by Leave a comment

Via Technologies on Tuesday unveiled the $49 APC Android PC system. Powered by a WonderMedia ARM processor that operates at 800MHz, APC integrates 512MB of DDR3 memory, 2GB NAND flash storage, and a full set of consumer I/O features in a small footprint Neo-ITX motherboard. The system also features a custom build of Android that has been optimized for keyboard and mouse input, and comes with a browser and a selection of preinstalled apps.

Read more

Serial four digit 7-segment LED display module

Posted on by 29 comments

Seven segment LED displays are a very popular mean of displaying numerical information and finds application in front panel display boards of microwave ovens, washers and dryers, digital clocks, frequency counters, and many other gadgets. Compared to the LCD displays, the seven segment LED displays are brighter and provide a far viewing distance and a wide viewing angle. However, the downside is they are resource-hungry. It requires at least 12 I/O pins of a microcontroller to drive a standard 4-digit seven segment LED module. Consequently, their use with low pin-count microcontrollers (such as PIC12F series) is not practically feasible. Here’s

Read more

Add a thermometer to your digital multimeter

Posted on by 17 comments

A digital multimeter is a very useful instrument that combines several measurement functions in one unit. A typical multimeter includes features of a variable-range ohmmeter, voltmeter, and ammeter. Some of them also include capabilities of testing diodes and transistors. In this article, I am going to talk about a technique of adding thermometer feature to a regular digital multimeter. The technique is very simple and uses one temperature sensor along with two resistors and a DPDT slide switch.

Read more

Testing active analog temperature sensors with a multimeter

Posted on by 6 comments

There are quite a variety of active analog temperature sensor ICs that provide an output voltage proportional to the temperature. They usually don’t require any external calibration and signal conditioning, and as such their output can be directly fed to the input of an ADC for digital processing. A few examples of such sensors are LM34, LM35, TMP35/36/37, and MCP9701. If you are having any trouble using any of these sensors in your project, here is a quick way to test if your sensor is working or not.

Read more

Interfacing an external ADC chip to FPGA/CPLD

Posted on by Leave a comment

Chris (from PyroElectro) has posted an article on interfacing an external ADC chip to FPGAs and CPLDs, which do not have A/D capabilities built-in. He illustrates the idea with an Altera EPM7128 and a MAX150 8-bit analog to digital converter IC. The test analog signal is derived using a potentiometer and the converted digital output is shown using an LED bargraph display. The interface between the CPLD and ADC has been implemented in VHDL.  

Read more
« Older Entries Recent Entries »