Tutorial 8: ESP8266 Internet clock
|
|
The National Institute of Standards and Technology (NIST) provides official time in the United States. NIST disseminates the time using several methods, including radio broadcasting over short-wave and long-wave frequencies, telephone dial-in services (ACTS), and Network Time Service (NTS) over the internet. This tutorial describes how to build an ESP8266-based internet clock that uses NIST’s NTS service to retrieve accurate time information. The time is displayed on a colorful TFT LCD (ILI9341 driven) in both analog clock dial and digital formats. The time is synchronized to the NIST server in every 2-minute interval.
ESP8266 Internet Clock
Hardware
This project uses an ESP8266 module to connect to the NIST time server through a local home/office WiFi. I am using EasyESP-1 board for illustration. The time will be displayed on a 2.2″ ILI9341-driven TFT LCD. Please read Tutorial 7 for more details on how to interface the TFT LCD to EasyESP-1. The hardware setup for this project is same as for Tutorial 7.
Complete setup of LCD on the EasyESP-1 breadboard for Internet Clock
Software
As discussed in Tutorial 7, we will use the same TFT ILI9341 ESP library by Bodmer in this project too. The library comes with some really cool demo examples. This tutorial actually incorporates their TFT_Clock example for displaying time in an analog clock dial format. There are several examples available online showing how to implement Network Time Protocol (NTP) in Arduino to fetch time from NIST server. NIST operates several time servers for its Internet Time Service (ITS). The list of these time servers and their IP addresses can be found here. Note that NIST does not allow queries to any of their servers more frequently than once every 4 seconds. In this project, the queries are made once every two minutes. In between the queries, which is a 2-minute interval, the time is kept running locally using the delay() routine. You can download the complete ESP8266 Firmware for this project from the following link.
Download Internet Clock ILI9341 code
Important notes:
- The time-fetching code was derived from Kev_MacD‘s instructables on Steampunk ESP8266 Internet connected Clock.
- In the code, you need to change the network SSID and password to match to your network.
- In addition, you also need to adjust the GMT offset for your location to get the correct local time. For example, the GMT offset for EST is -5 (int hours_Offset_From_GMT = -5;).
- The display part of the code uses the TFT ILI9341 ESP library. You can read more about it in Tutorial 7.
- The time is displayed in 12 hour format on analog dial as well as in 24 hour digital format .
ESP8266 Internet clock
Buy EasyESP-1 board
More tutorials
EASYESP-1: A RAPID PROTOTYPING AND DEVELOPMENT BOARD FOR ESP8266
TUTORIAL 1: SETTING UP THE ARDUINO IDE FOR EASYESP-1
TUTORIAL 2: EASYESP-1 “HELLO WORLD” EXAMPLE
TUTORIAL 3: CONNECTING AN OLED DISPLAY TO ESP8266
TUTORIAL 4: WORKING WITH ESP8266 WIFI SCAN CLASS
TUTORIAL 5: SETTING UP AN ESP8266 WEB SERVER
TUTORIAL 6: ESP8266 AND BME280 MAKE A LOCAL/REMOTE WEATHER STATION
TUTORIAL 7: ESP8266 AND ILI9341 TFT LCD
|
|
Ich vermute einmal, dass Sie selber keine Lösung für mein Problem kennen.
Trotzdem hätte ich mich über eine Antwort auf meine Emails und den Comment oben gefreut.
Ich habe nun die Arduino IDE 1.6.5 verwendet und erhalte die folgende Fehlermeldung beim Kompilieren:
Arduino: 1.6.5 (Windows 7), Platine: “NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200”
In file included from InternetClock_ILI9341.ino:18:0:
C:\Users\uengel\Documents\Arduino\libraries\SPI/SPI.h:1378:8: error: ‘SPIClass’ does not name a type
extern SPIClass SPI;
^
In file included from InternetClock_ILI9341.ino:19:0:
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP/TFT_ILI9341_ESP.h:496:13: error: ‘SPIClass’ does not name a type
SPIClass *_SPI;
^
Multiple libraries were found for “SPI.h”
Used: C:\Users\uengel\Documents\Arduino\libraries\SPI
Not used: C:\Users\uengel\AppData\Roaming\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\libraries\SPI
Fehler beim Kompilieren.
Leider erhalte ich beim Kompilieren sehr viele Fehler, die ich als Anfänger nicht verstehe:
Arduino: 1.8.7 (Windows 7), Board: “NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash, 4M (1M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 115200”
C:\Program Files (x86)\Arduino\arduino-builder -dump-prefs -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\uengel\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\uengel\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\uengel\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:CpuFrequency=80,VTable=flash,FlashSize=4M1M,LwIPVariant=v2mss536,Debug=Disabled,DebugLevel=None____,FlashErase=none,UploadSpeed=115200 -ide-version=10807 -build-path C:\Users\uengel\AppData\Local\Temp\arduino_build_116690 -warnings=none -build-cache C:\Users\uengel\AppData\Local\Temp\arduino_cache_177292 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\esptool\0.4.13 -prefs=runtime.tools.esptool-0.4.13.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\esptool\0.4.13 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2 -prefs=runtime.tools.xtensa-lx106-elf-gcc-1.20.0-26-gb404fb9-2.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2 -prefs=runtime.tools.mkspiffs.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\0.2.0 -prefs=runtime.tools.mkspiffs-0.2.0.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\0.2.0 -verbose D:\3_ESP8266 NodeMCU\Tutorials\Uhren\TFT ILI9341 Analog-Uhr\InternetClock_ILI9341\InternetClock_ILI9341.ino
C:\Program Files (x86)\Arduino\arduino-builder -compile -logger=machine -hardware C:\Program Files (x86)\Arduino\hardware -hardware C:\Users\uengel\AppData\Local\Arduino15\packages -tools C:\Program Files (x86)\Arduino\tools-builder -tools C:\Program Files (x86)\Arduino\hardware\tools\avr -tools C:\Users\uengel\AppData\Local\Arduino15\packages -built-in-libraries C:\Program Files (x86)\Arduino\libraries -libraries C:\Users\uengel\Documents\Arduino\libraries -fqbn=esp8266:esp8266:nodemcuv2:CpuFrequency=80,VTable=flash,FlashSize=4M1M,LwIPVariant=v2mss536,Debug=Disabled,DebugLevel=None____,FlashErase=none,UploadSpeed=115200 -ide-version=10807 -build-path C:\Users\uengel\AppData\Local\Temp\arduino_build_116690 -warnings=none -build-cache C:\Users\uengel\AppData\Local\Temp\arduino_cache_177292 -prefs=build.warn_data_percentage=75 -prefs=runtime.tools.esptool.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\esptool\0.4.13 -prefs=runtime.tools.esptool-0.4.13.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\esptool\0.4.13 -prefs=runtime.tools.xtensa-lx106-elf-gcc.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2 -prefs=runtime.tools.xtensa-lx106-elf-gcc-1.20.0-26-gb404fb9-2.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\xtensa-lx106-elf-gcc\1.20.0-26-gb404fb9-2 -prefs=runtime.tools.mkspiffs.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\0.2.0 -prefs=runtime.tools.mkspiffs-0.2.0.path=C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\tools\mkspiffs\0.2.0 -verbose D:\3_ESP8266 NodeMCU\Tutorials\Uhren\TFT ILI9341 Analog-Uhr\InternetClock_ILI9341\InternetClock_ILI9341.ino
Using board ‘nodemcuv2’ from platform in folder: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2
Using core ‘esp8266’ from platform in folder: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2
Detecting libraries used…
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o nul
Using cached library dependencies for file: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\libraries\SPI\SPI.cpp
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP\\TFT_ILI9341_ESP.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\BearSSLHelpers.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\CertStoreBearSSL.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFi.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFiAP.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFiGeneric.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFiMulti.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFiSTA.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\ESP8266WiFiScan.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiClient.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiClientSecureAxTLS.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiClientSecureBearSSL.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiServer.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiServerSecureAxTLS.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiServerSecureBearSSL.cpp” -o nul
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src\\WiFiUdp.cpp” -o nul
Generating function prototypes…
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -ffunction-sections -fdata-sections -w -x c++ -E -CC -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\preproc\\ctags_target_for_gcc_minus_e.cpp”
“C:\\Program Files (x86)\\Arduino\\tools-builder\\ctags\\5.8-arduino11/ctags” -u –language-force=c++ -f – –c++-kinds=svpf –fields=KSTtzns –line-directives “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\preproc\\ctags_target_for_gcc_minus_e.cpp”
Sketch wird kompiliert…
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -MMD -ffunction-sections -fdata-sections -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp” -o “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\sketch\\InternetClock_ILI9341.ino.cpp.o”
Compiling libraries…
Compiling library “SPI”
Zuvor kompilierte Datei wird verwendet: C:\Users\uengel\AppData\Local\Temp\arduino_build_116690\libraries\SPI\SPI.cpp.o
Compiling library “TFT_ILI9341_ESP”
“C:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\tools\\xtensa-lx106-elf-gcc\\1.20.0-26-gb404fb9-2/bin/xtensa-lx106-elf-g++” -D__ets__ -DICACHE_FLASH -U__STRICT_ANSI__ “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/lwip2/include” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2/tools/sdk/libc/xtensa-lx106-elf/include” “-IC:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690/core” -c -w -Os -g -mlongcalls -mtext-section-literals -fno-exceptions -fno-rtti -falign-functions=4 -std=c++11 -MMD -ffunction-sections -fdata-sections -DF_CPU=80000000L -DLWIP_OPEN_SRC -DTCP_MSS=536 -DARDUINO=10807 -DARDUINO_ESP8266_NODEMCU -DARDUINO_ARCH_ESP8266 “-DARDUINO_BOARD=\”ESP8266_NODEMCU\”” -DESP8266 “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\cores\\esp8266” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\variants\\nodemcu” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\SPI” “-IC:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP” “-IC:\\Users\\uengel\\AppData\\Local\\Arduino15\\packages\\esp8266\\hardware\\esp8266\\2.4.2\\libraries\\ESP8266WiFi\\src” “C:\\Users\\uengel\\Documents\\Arduino\\libraries\\TFT_ILI9341_ESP\\TFT_ILI9341_ESP.cpp” -o “C:\\Users\\uengel\\AppData\\Local\\Temp\\arduino_build_116690\\libraries\\TFT_ILI9341_ESP\\TFT_ILI9341_ESP.cpp.o”
In file included from C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP/Fonts/glcdfont.c:6:0,
from C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.h:28,
from C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:19:
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp: In member function ‘virtual size_t TFT_ILI9341_ESP::write(uint8_t)’:
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2112:89: error: invalid conversion from ‘unsigned int’ to ‘const void*’ [-fpermissive]
width = pgm_read_byte( pgm_read_dword( &(fontdata[textfont].widthtbl ) ) + uniCode-32 );
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:51: note: in definition of macro ‘pgm_read_byte’
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp: In member function ‘int16_t TFT_ILI9341_ESP::drawChar(unsigned int, int, int, int)’:
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2259:76: error: invalid conversion from ‘unsigned int’ to ‘const void*’ [-fpermissive]
width = pgm_read_byte( pgm_read_dword( &(fontdata[font].widthtbl ) ) + uniCode );
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:51: note: in definition of macro ‘pgm_read_byte’
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2284:54: error: invalid conversion from ‘uint32_t {aka unsigned int}’ to ‘const void*’ [-fpermissive]
line = pgm_read_byte(flash_address + w * i + k);
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:51: note: in definition of macro ‘pgm_read_byte’
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2324:54: error: invalid conversion from ‘uint32_t {aka unsigned int}’ to ‘const void*’ [-fpermissive]
line = pgm_read_byte(flash_address + w * i + k);
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:51: note: in definition of macro ‘pgm_read_byte’
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:55: error: invalid conversion from ‘uint32_t {aka unsigned int}’ to ‘const void*’ [-fpermissive]
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2368:16: note: in expansion of macro ‘pgm_read_byte’
line = pgm_read_byte(flash_address);
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:123:55: error: invalid conversion from ‘uint32_t {aka unsigned int}’ to ‘const void*’ [-fpermissive]
#define pgm_read_byte(addr) pgm_read_byte_inlined(addr)
^
C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP\TFT_ILI9341_ESP.cpp:2424:16: note: in expansion of macro ‘pgm_read_byte’
line = pgm_read_byte(flash_address++); // 8 bytes smaller when incrementing here
^
C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\cores\esp8266/pgmspace.h:105:23: error: initializing argument 1 of ‘uint8_t pgm_read_byte_inlined(const void*)’ [-fpermissive]
static inline uint8_t pgm_read_byte_inlined(const void* addr) {
^
Mehrere Bibliotheken wurden für “SPI.h” gefunden
Benutzt: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\libraries\SPI
Nicht benutzt: C:\Users\uengel\Documents\Arduino\libraries\SPI
Nicht benutzt: C:\Program Files (x86)\Arduino\libraries\SPI
Bibliothek SPI in Version 1.0 im Ordner: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\libraries\SPI wird verwendet
Bibliothek TFT_ILI9341_ESP in Version 0.16 im Ordner: C:\Users\uengel\Documents\Arduino\libraries\TFT_ILI9341_ESP wird verwendet
Bibliothek ESP8266WiFi in Version 1.0 im Ordner: C:\Users\uengel\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.4.2\libraries\ESP8266WiFi wird verwendet
exit status 1
Fehler beim Kompilieren für das Board NodeMCU 1.0 (ESP-12E Module).
Pingback: NTP synchronized clock - Electronics-Lab