MCU develeopment tools | Embedded Lab

Category Archives: MCU develeopment tools

Breakout board for PIC16F1847 microcontroller

Posted on August 9, 2012 by R-B 13 comments

This is an improved version of my 18-pin PIC16F series breadboard module that I have used in many of my PIC tutorials and projects published in this website. The new version has got a +5V power supply regulator on-board and a 2.1mm female barrel jack for DC input from a wall adapter. The 18-pin PIC16F series microcontrollers are still very popular among hobbyists and beginners because of their compact size, low cost, and simplicity. The PIC16F1847 is the latest release in this series and is equipped with lot more peripherals and enhanced features than its predecessors. This breakout board will be helpful

PIC12F microcontroller project board

Posted on June 23, 2012 by R-B 10 comments

The 12F series of PIC microcontrollers are handy little 8-pin devices designed for small embedded applications that do not require too many I/O resources, and where small size is advantageous. These applications include a wide range of everyday products such as hair dryers, electric toothbrushes, rice cookers, vacuum cleaners, coffee makers, and blenders. Despite their small size, the PIC12F series microcontrollers offer interesting features including wide operating voltage, internal programmable oscillator, 4 channels of 10-bit ADC, on-board EEPROM memory, on-chip voltage reference, multiple communication peripherals (UART, SPI, and I2C), PWM, and more. The following project board is designed for fast

Breadboard module for 18-pin PIC16F microcontrollers (PCB version)

Posted on December 25, 2011 by R-B 5 comments

Because of their compact size, ease of use and many built-in peripherals, the 18-pin PIC16F series processors (PIC16F628A, PIC16F88, and now PIC16F1827/47) have always been my favorite microcontrollers. Many of my projects and tutorials written in this blog also use PIC16F628A and PIC16F1827 microcontrollers. As I will be using them more in the future too, I thought of making some PCB versions of my breadboard module for PIC16F628A with some modifications. I used Iteadstudio’s PCB prototyping service for this, and I would say the PCBs turned out really well for the price I paid. I used their 2 layer 5cm x 5cm