Category Archives: Tips and Tricks


Using TC74 (Microchip) thermal sensor for temperature measurement

Posted on by 26 comments

The TC74 chip is a serially accessible, digital temperature sensor from Microchip Technology that acquires and converts temperature information from its onboard solid-state sensor with a resolution of 1°C. The temperature is available as an 8-bit digital word stored in its internal temperature register, which is accessible through a 2-wire I2C compatible serial bus. This tutorial describes how to use the TC74 sensor with a PIC microcontroller to measure the surrounding temperature.

Read more

A very simple IR remote control switch for an electrical appliance

Posted on by 199 comments

This project describes a technique of adding the remote control feature to an electrical appliance. The goal is to construct a black box where you can plug-in your 120V AC appliance (it can be easily modified for 220 V mains supply too) and control the ON and OFF operations with a TV or DVD remote that uses modulated infra-red (IR) pulse train of 38 KHz frequency. I did this project for my wife who studies late at night on her bed and later feels tired to stand up and turns the light off. Now she does it from bed with

Read more

Using Fixed Voltage Reference (FVR) for A/D conversion in enhanced mid-range PIC microcontrollers

Posted on by 13 comments

The reference voltage plays a very important role in any A/D conversion. It determines both the range and the resolution (Volt/Count) of the A/D conversion. Besides, the accuracy of the conversion also depends upon how stable the reference voltage is. Usually in PIC microcontrollers, the reference voltage for A/D conversion can be selected as the supply voltage itself or provided externally through one or more I/O pins. But the new enhanced mid-range family of 8-bit PIC microcontrollers have a built-in module that generates a stable reference voltage internally. It is called Fixed Voltage Reference (FVR) where the output is very

Read more

How to interface MAXIM’s DS1868 digital potentiometer with a PIC microcontroller

Posted on by 8 comments

Potentiometers find applications in many electrical devices. For example, a light dimmer uses a potentiometer to control the brightness of lamps. In amplifiers, they are used to control the output volume of the music, or change the bass level. In an adjustable power supply we see potentiometers to vary the output voltage and current. In a frequency generator, they are used to control the duty cycle and frequency of the output signal. These potentiometers are electro-mechanical transducers that convert the rotary or linear displacement into a change in resistance. This change in resistance can be used to control anything from

Read more

Expanding the number of I/O lines using Microchip MCP23008

Posted on by 6 comments

A microcontroller comes with a limited number of general purpose input and output (GPIO) ports. However, some applications may require more ports than are available on the microcontroller. In such a case, GPIO expanders can be used to increase the I/O capability of the microcontroller. MCP23008 is one such device (manufactured by Microchip Technology) which provides an easy I/O expansion using 2-wire serial interface. This tutorial illustrates how to add an extra 8-bit I/O port to PIC12683 microcontroller (which has only 6 I/O pins) using MCP23008. A seven segment LED display and a tact switch will be connected to the

Read more
« Older Entries Recent Entries »