Tag Archives: StartUSB


Make your own motion sensor alarm with SMS feature

Posted on by 3 comments

MikroEleketronika demonstrates how to build a simple home alarm system that has the capability of sending SMS to a predefined cell phone number when intrusion is detected. This project is based on StartUSB for PIC board, a small development board for PIC18F2550, which is preprogrammed with an USB bootloder so that no additional programmer is required to load the firmware. The SMS portion uses a SmartGM862 Board, which is a full-featured development tool for the Telit’s GM862 GSM/GPRS module. All the boards required for this project can be purchased as SMS Home Alarm Kit from mikroElektronika. A demonstration software for PIC is also available for free. They are offering free shipping now.

DIY home alarm kit

Read more

Getting started with PIC18F Microcontrollers

Posted on by 14 comments

After writing quite a bit of experimental tutorials on PIC16F series of microcontrollers, I thought of moving forward to the enhanced-range family of PIC microcontrollers, the PIC18F, which was introduced by Microchip in late 90s. Although PIC16F series are excellent general purpose microcontrollers, certain limitations have emerged, such as, they have limited program and data memory, their stack size is small, and all the interrupt sources have to share a single interrupt vector. Their limited instruction set also doesn’t provide direct support for more advanced peripherals interfaces like USB and CAN. The basis of the PIC18F Series is to address the issues that limit the PIC16F series. The PIC18F series of microcontrollers has larger instruction set, more memory, bigger stack, more external interrupts, higher speed, enhanced I/O port architecture, and many more features that we will be exploring in upcoming tutorials. I have decided that I am not going to spend much time on soldering and making my own prototyping board for PIC18F microcontroller as I did for PIC16F. I am going to use StartUSB for PIC board from mikroElektronika for writing these tutorials.

StartUSB for PIC board from mikroElektronika

Read more