Simplest Temperature Data Logger based on PIC12F683

This one chip data logger uses PIC12F683 microcontroller to read temperature from a DS1820 sensor and store it inside its internal EEPROM memory. The process is repeated in every 1 sec, 1 min, or 10 min interval as selected by user. The stored values can be transferred to a host PC through serial port. The serial communication uses a transistor based TTL to RS232 Level converter circuit to transfer data to PC.

This logger can store up to 254 temperature measurements in its internal EEPROM. Each data is 8-bit and the temperature resolution is 1 degree C. With three tact switch inputs, the user can control Start, Stop, Send, Reset, and Sampling time set operations. The hardware and firmware is available for free.


Read

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *