Exploring STC 8051 Microcontrollers – Coding

Epilogue

As with any new microcontroller, I enjoyed developing stuffs for STC micros too. Every hardware peripheral was a new experience for me, especially the PCA module. The reasons why I love exploring 8051 core-based MCUs are their relative ease of usage, compatibility and similarity. STC microcontrollers were no exceptions.

There were times during the forging of this work, I did face some odd issues while cherished at some other points and here in the end I would like share some of them.

  • While trying out multichannel ADCs, I did notice significant interference amongst channels but later I fixed it by changing ADC clock speed.
  • The analogue frontend of STC micros need special attention when designing PCBs because things may not look good if things as stated in the first point happen.
  • The more the resolution of an ADC, the more noise it is likely to pick and so external Op-Amp-based buffering and filtering should be considered. Good external reference voltage source should be used for good accuracy.
  • As with any 8051-based MCU, memory model is a very important stuff and should be considered in some cases, especially when dealing with pointers and large arrays. The following link describes memory model in details specifically for Keil C51 C compiler: https://www.keil.com/support/man/docs/c51/c51_le_memmodels.htm
  • The programmer GUI is a tool that has many optional functions that are really very helpful. I advise updating the GUI as new releases are uploaded.
  • Since STC’s portfolio consists of wide variety of 8051-based MCUs, it is possible to use the BSP header files I coded in this document and slightly modify for other STC MCUs.
  • STC should invest on a free-compiler of its own. In the past, I have criticized many Chinese semiconductor manufacturers for their lack of software support and STC doesn’t stand different from the others. The same is true for official development boards.

Finally, I would like to state that STC micros are game changers in the market of 8051-based microcontrollers. They are reliable, cheap and in fact widely used in Chinese and Asian markets. Personally, I feel delighted to have introduced them to the non-Chinese world. STC micros are without any doubt good micros for any new design.

PDF of this tutorial can be found here.

Code Examples and Libraries used in this tutorial can be downloaded from here.

All demo videos of this tutorial can be found in this Youtube playlist.

Happy coding.

Author: Shawon M. Shahryiar

https://www.facebook.com/groups/microarena

https://www.facebook.com/MicroArena   

03.12.2021

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Related Posts

17 comments

  • hello.
    this is a very good effort to document all and still share with us. thank you very much.
    I have one doubt . which programming tool are you using ?

  • Hi, I am trying to understand the STC15w408as chip, and found this site after weeks of searching for something that sets the output of the GPIO pins to a different state. I have a the 28 pin stc15w and have connected it up with a FTDI board and can write to it using PlatformIO. The thing is, the GPIO ports if just switched on or do a reset they are in the HIGH state and I am trying to make them LOW when you do a reset.
    Is your BSP code doing this and for what port or GPIO pin is it setting? I could change your P52 and P55 in your SETUP to the GPIO pins on my development board but not under standing the BSP Code.
    Wonder if you get this post? but any help would be gratefully received.

  • Hi,
    How Purchase the development board. Please,give the purchase link for this Development board.

  • How To read and write string data using IAP into memory

    • void IAP_erase(unsigned int address)
      {
      IAP_CONTR = 0x80; //?? IAP
      IAP_TPS = 12;
      // IAP_CONTR = IAP_WT;
      IAP_CMD = IAP_erase_command;
      IAP_address(address);
      IAP_trigger;
      _nop_();
      _nop_();
      _nop_();
      IAP_clear;
      }

      void IAP_send_string(unsigned int uc_send_addr,unsigned char *uca_send_string,unsigned int uc_number_of_bytes)
      {
      unsigned int buff_cntr=0;
      do
      {
      IAP_CONTR = 0x80; //?? ISP/IAP ??
      IAP_TPS = (unsigned char)(11509200 / 1000000L); //??????
      IAP_CMD = IAP_write_command;

      // IAP_CMD = IAP_write_command;
      IAP_ADDRH = uc_send_addr / 256; //??????(??????????????)
      IAP_ADDRL = uc_send_addr % 256; //??????
      IAP_DATA = uca_send_string[buff_cntr]; //???? ISP_DATA,????????????
      IAP_trigger;//IAP_TRIG();
      _nop_();
      _nop_();
      _nop_();
      uc_send_addr++;
      // uca_send_string++;
      buff_cntr++;

      IAP_clear;
      delay_ms(8);
      }while(–uc_number_of_bytes);
      }

      void IAP_read_string(unsigned int uc_read_addr,unsigned char *data_read,unsigned int uc_number_of_bytes)
      {
      unsigned int buff_cntr=0;
      do{
      IAP_CONTR = 0x80; //?? ISP/IAP ??
      IAP_TPS = (unsigned char)(11059200 / 1000000L); //??????
      IAP_CMD = IAP_read_command;

      // IAP_CMD = IAP_read_command;
      IAP_ADDRH = uc_read_addr / 256; //??????(??????????????)
      IAP_ADDRL = uc_read_addr % 256; //??????
      IAP_trigger;//IAP_TRIG(); //?? 5AH,?? A5H ? ISP/IAP ?????,
      //???????
      //?? A5H ?, ISP/IAP ?????????
      //CPU ?? IAP ???,?????????
      _nop_();
      _nop_();
      _nop_();
      data_read[buff_cntr] = IAP_DATA; //???????
      uc_read_addr++;
      // data_read++;
      buff_cntr++;

      IAP_clear;
      delay_ms(8);
      }while(–uc_number_of_bytes);
      }

      stores only last byte to all bytes of flash memory sector… memory sector selected is 0xF600

  • Hi, I am using STC MCU since 10 years. Tech support is ZERO. but they are low cost, very stable. Now I have a problem when the chip that I used is obsolete. Now start to use STC8C2K64S4-28I-LQFP32 but no stc8Cxx.h file, I am using stc8Hxx.h file which compiles but in some stage freeze, the existing firmware. With stc8hxx.h file I can compile STC8F2K64S4-28I-LQFP32 and works not bad
    .
    I wrote them many times for the stc8Cxx.h file never got answer. Where Can I find that file?
    Thank you

  • Hi. Can you explain how to use I2C in the slave mode ?

    • I tried STC8G1K08A i2c in slave mode. Doesn’t work (no response). It does not enter interrupt, even on a start condition (everything according to the code in the documentation). I also tried master mode – it works.

  • Thanks for these tutorials. I’m getting back into STCmicro coding now, having left them alone for the past several years. Back then I only used the STC89C52RC (and C54RD) but this time I’m also using the more powerful STC15 and STC8 types. Your blogs provide a wealth of useful information.

  • Hello,

    You have done great job with all these tutorials. I am an electronics engineer trying to learn some new stuff. I am located in Greece , Europe and I would like to purchase the development board that you are using and download some datasheets in English if possible but I cannot find them anywhere. Could you please help me?

  • i always get excited when you release new tutorials ,you are really doing a great job i wish i could write code and develop libraries like you.

  • Well, this is very nice and thorough tutorial indeed, many thanks!
    Unfortunately I doubt there is good any reason to learn the STC platform beyond curiosity.
    The STC 8051, although pretty evolved from the original 8051 ISA, does not offer anything crucial to justify the relatively high price of these micros and development tools along with certain cumbersomeness of this ancient platform.
    They simply can not compete even with the legacy Cortex M0 in any way. I am even not aware about any affordable debugger/emulator for them.
    All in all, I would never recommend anybody to start learning/using any 8051 without some very good reason to do so.

Leave a Reply to djalltra Cancel reply

Your email address will not be published. Required fields are marked *